Plymouth Electrical Services

Plymouth Electrician, Electrical Services in Plymouth?

Below is an example of typical work carried out by our qualified team of electricians in Plymouth, and different elements involved in each of these jobs.

Please note this is just a sample, and we do in fact carry out all other aspects of electrical work.

For more information and to arrange for a quote, please contact us directly.

Install a ceiling down light

Full down light installation including labour

Replace broken electrical sockets

Our electrician will supply and install standard white plastic socket fronts.

Install additional electrical sockets

Our electrician will supply and fit an additional surface mounted socket, and will run all the new wires to a maximum of 10 meters for power supply.

Install extra telephone extension point

Our fitter will supply and fit an extra phone point including a maximum of 10 metres of cable or to be surface mounted.

Install extra TV extension point

Our electrician will supply and fit an additional TV point from your existing TV inclusive of up to 15 metres cable. Job also includes chasing wires if required.

  • Materials supplied
  • Up to 15 meters of coaxial cable
  • Screened outlet plates for digital TV / Radio and analogue signals

Install extractor fan in bathroom / toilets or kitchen

Our electrician will supply and install a standard extractor fan for bathrooms and toilets.

  • Low Noise (45dBA)
  • Volume 85m³/hr
  • 100mm Spigot
  • 15W Max 40ºC
  • Ducts up to 1.5m
  • Thermal Protection

Install electrical shaver point

Our Electrician will supply and fit a new shaver point and run new wire up to 5 meters away from the power supply.

Wires will be chased into the wall or fed through stud wall as required. All materials supplied by us.

Finishing of earthing & bonding

Connect existing earth bonding to water / gas pipes.

Install new electrical light & switch

Supply and fit one new light switch with ceiling pendant.

To be chased into wall or surface mounted.

Install new light fitting

Installation of any replacement light fittings supplied by the client. We will provide extra of cabling as required.

Installing Passive Infra Red (PIR) Exterior floodlighting

Our fitter will remove your old light from your property and supply and fit a new front Floodlight PIR 180° 150W Black in its place. Our fitter will also supply and fit a new Floodlight PIR 180° 150W Black to the rear of your property and to be wired up to 6 meters away from the power supply

Replace fluorescent light fittings

Our electrician will install fluorescent lamp fittings and tubes supplied by customer.

Install wireless security alarms

Our electrician will install your new wireless security alarm base unit, all you need to do is to supply the new security alarm and our fitter will do the rest.

Install mains powered security alarms

Mains-powered alarms eliminate the problem of checking the battery but to be really safe you need a battery back-up. They need to be installed by a qualified electrician.

Install cooker socket

Our electrician will supply and fit a new Cooker Switch Socket 45amp and will run wire up to ten meters away from the consumer unit.

Wires will be chased into wall or encased in trunking as required.

Install new cooker / oven

Our electrician with remove your old electric cooker and install your new electric cook into the same position or the same unit.

Install new cooker hood

Our fitter will install your new hood and drill a core hole to the outside and install vent kit. (Hood and vent kit supplied by customer.)

The price quoted includes all labour and wiring needed to complete the installation.

Install new 10-way consumer unit

Our electrician will remove your old Consumer Unit then replace it with this new 10 way Split Load Kit Box comprising 100A DP main switch and 2 x 63A 30mA RCD, 8 x 6kA SP MCBs: 2 x 6A, 2 x 16A, 3 x 32A, 1 x 40A. BS EN 60439-3

Rewire new lights

Rewire lights up to 6 and switches on one floor. The new wiring will be run in existing trucking if this can be accessed.

Our fitter will take great care in lifting any carpets and relaying them but you may need to have a carpet fitted to re stretched them when our fitters has finished.

All you need to is to supply and light fitting and switches that you wish to have fitted

Wire new single storey rear extension

Our Electrician will supply and fit all the materials need to complete the job using the following materials

  • One Oven socket
  • Eight double power points
  • Up to 15 halogen spot lights down lights
  • Four light switches
  • Two outside lights
  • One extractor fan

Kitchen wiring / Kitchen re-wiring

Our electrician will carry out all the following:

  • Wire and installation of one single switched socket for hob
  • Wire and installation of one 45amp outlet for cooker
  • All switches are to stay in same location
  • Wire and installation of one single switched socket, switched fused spur for safe isolation for microwave.
  • Wire and installation of one single switched socket, switched fused spur for safe isolation for extractor fan
  • Wire and installation of up to eight double sockets
  • All works completed to 17th edition I.E.E regulations

Example rewiring of a 3 bedroom house

Electrical rewiring of a 3 bedroom property – Supply and fitting the following.

  • 1x New consumer unit.
  • 20x white plastic double sockets
  • 9x white pendants and light switches
  • 1x extractor fan.
  • 1x cooker hood.
  • 13amp spur for boiler.
  • 1x cooker 45amp point.
  • All work completed to 17th edition I.E.E regulation, and tested and inspected

NICEIC certified electrical inspection

Our electrician will carry out a Periodic Inspection Report (PIR) on a property all to new Part-P regulation plus remedial actions.